100R8 Thermoplastic Hydraulic Hose Non-Conductive

Series: PF628NC

Application

Piranhaflex Series PF628/PF628NC is ideal for general purpose high pressure hydraulic applications with working pressures of 2,250 to 5,000 psi (depending on size). This hose is commonly used in industrial hydraulic construction, material handling, and agricultural equipment. Available in Twin-Line.

Construction

Tube- Extruded seamless polyester inner tube.
Reinforcement- Aramid fiber reinforcement.
Cover- Series PF628NC has a orange highly abrasion resistant polyurethane pin picked cover.
Branding- PIRANHAFLEX SAE 100R8 NON-CONDUCTIVE

Temperature Range

-40F °(-40°C) to 200°F (93°C) for petroleum based hydraulic fluids.

Standard Lengths

Hoses supplied in 250 ft. reels & 50 ft. box lengths.

Features

• Extremely durable.
• Good kink resistance.
• Lightweight-less than about half that of comparable rubber/wire hose.
• Meets or exceeds SAE 100R8 impulse requirements at half of SAE recommended bend radius.
• Will not swell or degrade in contact with most hydraulic fluids or oils.
• Highly abrasion resistant.
• Inner tube will not chip or peel in service, eliminating the possibility of system contamination.
• Linear change ±3% under typical operating pressure.
Working pressures are calculated at 70 degrees F (20 degrees C). Maximum working pressure decreases as temperature increases. Pressure ratings can only be achieved using proper coupling procedures. Bend radius is calculated at 70 degrees F (20 degrees C). Flexibility may vary at different temperatures. Please contact IRP if you have concerns regarding your application.