AIR HOSE

CHALLENGER EPDM GENERAL SERVICE HOSE

Application

An economical EPDM multi purpose hose used in a wide range of air, water, and light agricultural chemical applications. Challenger General Service hose is used in construction, marine, agricultural, and industrial applications.

Construction

Tube- Black EPDM blended rubber
Reinforcement- Polyester yarn
Cover- Smooth red abrasion resistant EPDM blend.

Temperature Range

-20°C to +93°C (-4°F to +200°F)

Standard Lengths

1/4" to 1/2" - 600ft reels (two 300ft pieces) 3/4" and 1" - 400ft reels (two 200ft pieces) 25ft multiples
 
Parts No.
I.D. Inches
O.D. Inches
Max W.P. @ 70°F/20°C
Approx. Wt. Per. Ft. Lbs.
Reel Quantities
CHAL-.25-250 1/4 0.51 250 0.110 600 ft = 300 ft + 300 ft
CHAL-.375-250 3/8 0.67 250 0.160 600 ft = 300 ft + 300 ft
CHAL-.5-250 1/2 0.83 250 0.230 600 ft = 300 ft + 300 ft
CHAL-.625-250 5/8 1.024 250 0.320 600 ft = 300 ft + 300 ft
CHAL-.75-250 3/4 1.14 250 0.400 400 ft = 200 ft + 200 ft
CHAL-1-200 1 1.40 200 0.530 400 ft = 200 ft + 200 ft
Working pressures are calculated at 70 degrees F (20 degrees C). Maximum working pressure decreases as temperature increases. Pressure ratings can only be achieved using proper coupling procedures. Bend radius is calculated at 70 degrees F (20 degrees C). Flexibility may vary at different temperatures. Please contact IRP if you have concerns regarding your application.