CHEM MAXX is a very versatile hose used for the transfer of chemicals and will handle 90% of known chemicals and petroleum products in both suction and discharge applications.
Construction
Tube - Translucent smooth cross-linked polyethylene (XLPE)
Reinforcement - A dual wire helix between two layers of high tensile synthetic cords
Cover - Green smooth EPDM chemical resistant rubber
Branding - White Stripe CHEM MAXX XLPE CHEMICAL HOSE 150 PSI
Temperature Range
-29°C to +66°C (-20°F to +150°F) or -29°C to +82°C (-20°F to +180°F) Depending on media being conveyed
Standard Lengths
50ft/ 100ft
Notes
*Reduced pressure ratings are advised when handling hot, extremely corrosive chemicals. *Working pressures shown are based on using a permanent type coupling such as swage or internally expanded. *For branding type couplings, the working pressure should be reduced to 65% of the pressure listed below.
Parts No.
I.D. Inches
O.D. Inches
Max W.P. @ 70°F/20°C
Bend Radius
Approx. Wt. Per. Ft. Lbs.
AC-.75
3/4
1.26
150
6
0.480
AC-1
1
1.50
150
8
0.690
AC-1.25
1-1/4
1.79
150
10
0.830
AC-1.5
1-1/2
2.05
150
12
1.030
AC-2
2
2.558
150
16
1.420
AC-2.5
2-1/2
3.08
150
25
1.730
AC-3
3
3.58
150
30
2.210
AC-4
4
4.65
150
40
3.460
Working pressures are calculated at 70 degrees F (20 degrees C). Maximum working pressure decreases as temperature increases. Pressure ratings can only be achieved using proper coupling procedures. Bend radius is calculated at 70 degrees F (20 degrees C). Flexibility may vary at different temperatures. Please contact IRP if you have concerns regarding your application.
