A lightweight flexible, silicone free chemical transfer hose designed for
almost every common industrial chemical used in industry
today. Non-staining FDA UHMW tube.
Construction
Tube- Clear Ultra High Molecular Weight polyethylene.
Reinforcement- Multiple synthetic textile cords and a dual wire helix
Cover- Green abrasion resistant green EPDM
Branding- Yellow Stripe CHEM MAXX UHMW CHEMICAL HOSE 250 PSI
Caution: Use only for intended service. Inspect Hose & Fittings before each use. Damage or misapplication may result in property damage or serious personal injury.
Temperature Range
-40°C (-40°F) to 93°C (199°F)
Standard Lengths
100ft
Notes
Reduced pressure ratings are advised when handling hot, extremely corrosive chemicals.
Working pressures shown are based on using a permanent type coupling such as swage or internally expanded.
For banded type couplings, the working pressure should be reduced to 65% of the pressures listed above.
Parts No.
I.D. Inches
O.D. Inches
Max W.P. @ 70°F/20°C
Bend Radius
Approx. Wt. Per. Ft. Lbs.
ULTRA-1
1
1.47
250
4
0.530
ULTRA-1.25
1-1/4
1.78
250
4
0.750
ULTRA-1.5
1-1/2
2.08
250
4
0.960
ULTRA-2
2
2.58
250
6
1.300
ULTRA-3
3
3.66
200
9
2.090
Working pressures are calculated at 70 degrees F (20 degrees C). Maximum working pressure decreases as temperature increases. Pressure ratings can only be achieved using proper coupling procedures. Bend radius is calculated at 70 degrees F (20 degrees C). Flexibility may vary at different temperatures. Please contact IRP if you have concerns regarding your application.
