GENERAL PURPOSE HOSE

RUBBER PUSH-ON - MSHA APPROVED

Series: FLEX LOC 300

Application

This hose is designed for use with robotic welders or any other application requiring MHSA approved flame resistant cover. The 300psi hose is oil resistant and non-conductive. It is designed to be used with push-on fittings

Construction

Tube- Black nitrile, Class A, PVC/ Nitrile Tube
Reinforcement- Spiral Aramid Yarn
Cover- Nitrile/ PVC RMA Class A Rubber

Temperature Range

-34°C to +82°C (-30°F to +180°F)

Standard Lengths

25ft multiples or 700ft reels
 
Parts No.
I.D. Inches
O.D. Inches
Max W.P. @ 70°F/20°C
Approx. Wt. Per. Ft. Lbs.
PUSRBLK300-.25 1/4 0.50 300 0.100
PUSRBLK300-.375 3/8 0.625 300 0.130
PUSRBLK300-.5 1/2 0.75 300 0.160
Working pressures are calculated at 70 degrees F (20 degrees C). Maximum working pressure decreases as temperature increases. Pressure ratings can only be achieved using proper coupling procedures. Bend radius is calculated at 70 degrees F (20 degrees C). Flexibility may vary at different temperatures. Please contact IRP if you have concerns regarding your application.