BLAST MAXX Sandblast hose is designed for conveying sand, steel shot and other abrasive materials. Built with a static conductive 1/4" thick abrasion resistant tube designed for transferring abrasives at high velocity.
Construction
Tube -1/4" black static conductive abrasion resistant natural rubber
Reinforcement - Two layers of synthetic textile cords
Cover - Black natural / EPDM blended rubber
Branding - Red Stripe BLAST MAXX SANDBLAST HOSE 150 PSI
Temperature Range
-40°C to +82°C (-40°F to +180°F)
Standard Lengths
50ft/ 100ft
Parts No.
I.D. Inches
O.D. Inches
Max W.P. @ 70°F/20°C
Approx. Wt. Per. Ft. Lbs.
SB-.5-1.063
1/2
1.063
150
0.470
SB-.5-1.125
1/2
1.125
150
0.490
SB-.75-1.5
3/4
1.500
150
0.720
SB-1
1
1.875
150
1.060
SB-1.25-1.875
1-1/4
1.875
150
1.110
SB-1.25-2.156
1-1/4
2.156
150
1.250
SB-1.5
1-1/2
2.375
150
1.430
SB-2
2
2.875
150
1.690
SB-2.5
2-1/2
3.425
150
2.370
SB-3
3
4.000
150
3.090
Working pressures are calculated at 70 degrees F (20 degrees C). Maximum working pressure decreases as temperature increases. Pressure ratings can only be achieved using proper coupling procedures. Bend radius is calculated at 70 degrees F (20 degrees C). Flexibility may vary at different temperatures. Please contact IRP if you have concerns regarding your application.
