CMC MAXX corrugated material handling hose is designed for abrasive suction and discharge service. Utilizes split flanged couplings, which can be installed without special tools, allows hose to be purchased in long lengths and cut as required. The reusable coupling allow full flow of material and permits the hose to be easily rotated for even wear.
Construction
Tube - Highly abrasion resistant red pure gum rubber
Reinforcement - Synthetic fabric reinforcement and wire helix
Cover - Black abrasion resistant synthetic rubber corrugated to enhance flexibility and match internal corrugations of external split flanged coupling
Branding - Red stripe CMC MAXX CORRUGATED MATERIAL HANDLING CONDUCTING HOSE
Temperature Range
-40°C to +82°C (-40°F to +180°F)
Standard Lengths
2" to 6" - 100ft
8" - 40ft
10" - 40ft
12" - 20ft
Parts No.
I.D. Inches
O.D. Inches
Max W.P. @ 70°F/20°C
Bend Radius
Vacuum Rating (in Hg) 68F
Tube Gauge MM
Approx. Wt. Per. Ft. Lbs.
CMC-2
2
3.00
150
6
29.92
1/4
2.425
CMC-3
3
4.50
150
9
29.92
1/4
5.378
CMC-4
4
5.30
150
12
29.92
1/4
5.664
CMC-5
5
6.46
150
20
29.92
1/4
8.488
CMC-6
6
7.50
150
24
29.92
5/16
10.370
CMC-8
8
9.50
150
36
29.92
5/16
13.310
CMC-10
10
11.50
150
50
29.92
5/16
17.765
CMC-12
12
13.75
150
60
29.92
5/16
24.751
Working pressures are calculated at 70 degrees F (20 degrees C). Maximum working pressure decreases as temperature increases. Pressure ratings can only be achieved using proper coupling procedures. Bend radius is calculated at 70 degrees F (20 degrees C). Flexibility may vary at different temperatures. Please contact IRP if you have concerns regarding your application.
