WATER SUCTION HOSE

EPDM WATER SUCTION

Series: EPDM300

Application

Lightweight and flexible with abrasion resistant cover for agricultural chemicals and general industrial use. External helix provides for easy drag. Suitable for full vacuum.

Construction

Tube- Smooth, black (rubber) EPDM
Cover- Green polyethylene helix

Temperature Range

-40°C to +60°C (-40°F to +140°F)

Standard Lengths

100ft cut to multiples of 5ft at no charge

 
Parts No.
I.D. Inches
O.D. Inches
W.P. PSI
Bend Radius
Vacuum Rating (in Hg) 68F
Approx. Wt. Per. Ft. Lbs.
EPDMWS-1 1 1.34 50 1.9 29.8 0.230
EPDMWS-1.25 1-1/4 1.65 50 3.2 29.8 0.340
EPDMWS-1.5 1-1/2 1.84 50 3.2 29.8 0.400
EPDMWS-2 2 2.43 50 5.2 29.8 0.670
EPDMWS-2.5 2-1/2 2.99 50 5.6 29.8 0.920
EPDMWS-3 3 3.52 43 7.1 29.8 1.100
EPDMWS-4 4 4.61 38 11.0 29.8 1.840
EPDMWS-6 6 6.81 23 20.0 28.0 3.070
Working pressures are calculated at 70 degrees F (20 degrees C). Maximum working pressure decreases as temperature increases. Pressure ratings can only be achieved using proper coupling procedures. Bend radius is calculated at 70 degrees F (20 degrees C). Flexibility may vary at different temperatures. Please contact IRP if you have concerns regarding your application.

  EPDM WATER SUCTION ASSEMBLY

Series: EPDM300

Application

Lightweight and flexible with abrasion resistant cover for agricultural chemicals and general industrial use. External helix provides for easy drag. Suitable for full vacuum.

Construction

Tube- Smooth, black (rubber) EPDM
Cover- Green polyethylene helix

Temperature Range

-40°C to +60°C (-40°F to +140°F)

Standard Lengths

100ft cut to multiples of 5ft at no charge

 
Parts No.
I.D. Inches
O.D. Inches
W.P. PSI
Bend Radius
Vacuum Rating (in Hg) 68F
Approx. Wt. Per. Ft. Lbs.
EPDMWS-1.5-CGAC-CNP-20 1-1/2 1.84 50 3.2 29.8 0.400
EPDMWS-2-CGAC-CNP-20 2 2.43 50 5.2 29.8 0.670
EPDMWS-3-CGAC-CNP-20 3 3.52 43 7.1 29.8 1.100
EPDMWS-4-CGAC-CNP-20 4 4.61 38 11.0 29.8 1.840
EPDMWS-6-CGAC-CNP-20 6 6.81 23 20.0 28.0 3.070
EPDMWS-1.5-CGAC-CN-20 1-1/2 1.84 50 3.2 29.8 0.400
EPDMWS-2-CGAC-CN-20 2 2.43 50 5.2 29.8 0.670
EPDMWS-3-CGAC-CN-20 3 3.52 43 7.1 29.8 1.100
EPDMWS-4-CGAC-CN-20 4 4.61 38 11.0 29.8 1.840
EPDMWS-6-CGAC-CN-20 6 6.81 23 20.0 28.0 3.070
Working pressures are calculated at 70 degrees F (20 degrees C). Maximum working pressure decreases as temperature increases. Pressure ratings can only be achieved using proper coupling procedures. Bend radius is calculated at 70 degrees F (20 degrees C). Flexibility may vary at different temperatures. Please contact IRP if you have concerns regarding your application.