SPECIALTY HOSE

Silicone Fire Sleeve

Product Information

Designed to protect and to be easily installed over hoses, cables, tubings, and pipes. Protects individuals from incurring severe burn injuries on hot hoses and pipes

Resistant Against:

Molten metal splash Abrasion
Radiant Heat Steel Slag
Corrosion Chemicals
Vibration Moisture

Cover

Red, iron oxide silicone rubber

Reinforcement

Insulated braided E-glass fabric

Temperature Range

Rated for 500°F (260°C) continuous exposure:
Up to 2000°F (1093°C) for 15-20 minutes
Up to 3000°F (1650°C) for 15-30 seconds

Certifications

UL 1441 Flammability VW1 Certified
 
Parts No.
I.D. Inches
Standard Lengths
SFS-.25 1/4 50ft, 100ft
SFS-.375 3/8 50ft, 100ft
SFS-.5 1/2 50ft, 100ft
SFS-.625 5/8 50ft, 100ft
SFS-.75 3/4 50ft, 100ft
SFS-.875 7/8 50ft, 100ft
SFS-1 1 50ft, 100ft
SFS-1.125 1-1/8 50ft, 100ft
SFS-1.25 1-1/4 50ft, 100ft
SFS-1.375 1-3/8 50ft, 100ft
SFS-1.5 1-1/2 50ft, 100ft
SFS-1.625 1-5/8 50ft, 100ft
SFS-1.75 1-3/4 50ft, 100ft
SFS-2 2 50ft, 100ft
SFS-2.25 2-1/4 50ft, 100ft
SFS-3 3 50ft, 100ft
SFS-4 4 50ft, 100ft
Working pressures are calculated at 70 degrees F (20 degrees C). Maximum working pressure decreases as temperature increases. Pressure ratings can only be achieved using proper coupling procedures. Bend radius is calculated at 70 degrees F (20 degrees C). Flexibility may vary at different temperatures. Please contact IRP if you have concerns regarding your application.