GARAGE EXHAUST HOSE

FLARELOCK HOSE

Product Information

A crush resistant heavy duty exhaust hose made of specially compound rubber to resist heat, aging, gasoline, exhaust fumes and oil. Individual lengths are easily interconnected. When using on vehicles with catalytic mufflers, temperatures can be as high as 600°F. In these applications, use metal transitions to lower exhaust temperatures to acceptable levels. 

Standard Lengths

11ft

Notes

* This hose is to be used only when there is no load on engine.
 
Parts No.
I.D. Inches
Heat Resistance
Approx. Wt. Per Length Lbs.
FLT200 2 400°F (600°F intermittent) 4.800
FLT250 2-1/2 400°F (600°F intermittent) 8.000
FLT300 3 400°F (600°F intermittent) 10.000
FLT400 4 400°F (600°F intermittent) 17.000
Working pressures are calculated at 70 degrees F (20 degrees C). Maximum working pressure decreases as temperature increases. Pressure ratings can only be achieved using proper coupling procedures. Bend radius is calculated at 70 degrees F (20 degrees C). Flexibility may vary at different temperatures. Please contact IRP if you have concerns regarding your application.