WATER DISCHARGE HOSE

FLOW MAXX - Contractors Water Discharge (Mandrel Made)

Application

FLOW MAXX is a medium duty multi-use EPDM water discharge hose used on construction sites and for general water service.

Construction

Tube- Black EPDM rubber blend
Reinforcement- Multiple spirals of synthetic yarn
Cover- Black EPDM rubber blend
Branding- Yellow Stripe  FLOW MAXX EPDM WATER DISCHARGE HOSE

Temperature Range

-32°C to +82°C (-25°F to +180°F)

Standard Lengths

50ft/ 100ft
CWD-2.5 - 50ft Only
 
Parts No.
I.D. Inches
O.D. Inches
Max W.P. @ 70°F/20°C
Approx. Wt. Per. Ft. Lbs.
CWD-1.25 1-1/4 1.49 75 0.440
CWD-1.5 1-1/2 1.73 75 0.560
CWD-2 2 2.24 75 0.700
CWD-2.5 2-1/2 2.75 75 1.030
CWD-3 3 3.26 75 1.200
CWD-4 4 4.37 75 1.600
CWD-4.5 4.5 4.938 75 1.300
CWD-5 5 5.39 75 2.030
CWD-6 6 6.29 75 2.600
CWD-8 8 8.38 75 3.500
Working pressures are calculated at 70 degrees F (20 degrees C). Maximum working pressure decreases as temperature increases. Pressure ratings can only be achieved using proper coupling procedures. Bend radius is calculated at 70 degrees F (20 degrees C). Flexibility may vary at different temperatures. Please contact IRP if you have concerns regarding your application.